sql

Barcol Hardness Tester Ht-10 for still and alumunium

Rp. 123,456
Last Updated
19 Oct 2022
Country Origin
United States
Minimum Order
1 set

Specification of Barcol Hardness Tester Ht-10 for still and alumunium

Order Number:

HT-10 (934-1): For Aluminum, Aluminum alloys, Copper, Copper alloys, Fiber Reinforced Plastics and rigid plastics etc.

HT-11 (935): For soft metals such as Lead and Tin; soft plastics etc.

HT-12 (936): For Rubber, felt and leather etc.


Features:



  1. Easy to Use: Single hand operation; easy to use high efficiency able to make test at any site.

  2. High Sensitivity: Barcol Impressor has 100 graduations. Its sensitivity is much higher than the Webster hardness tester.

  3. Wide Testing Range: Used to test from very soft pure aluminum to very hard aluminum alloys.

  4. Less Thickness Requirement: It can test on any workpieces with thickness more than 0.8mm.

  5. No Supporting Required: It can test from only one side of the workpiece. It is unnecessary to move or support the workpiece. It is used to test very large and thick workpieces and assembly parts.

  6. Easy Conversion: The test results can be converted to HB, HR, HV and HW easily through the conversion table.

  7. High Quality Indenter: The indenter has very high hardness, long service life and good interchangeability    

     


Technical Parameter:



  • Testing Range: 0 ~ 100HBa (equivalent to 25 ~ 145HBW)

  • Resolution: 0.5HBa

  • Indication Error: ±2HBa (42 ~ 48HBa); ±1HBa (81 ~ 88HBa)

  • Repeatability Error: ±2HBa (42 ~ 48HBa); ±1HBa (81 ~ 88HBa)

  • Net Weight: 0.5 kg


Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Request a Quote
Produk Siap di Pesan
Rp 0
1